Convertible Top; Power Retractable Hardtop - Mazda MX-5 2007 Bodyshop Manual

BODY STRUCTURE [PANEL REPLACEMENT]

Convertible Top

11
2
8

Power Retractable Hardtop

Note
• Spot weld the 3 locations indicated by (A) and assemble the rear fender and the corner plate before
installing the rear fender to the vehicle.
• After assembling the rear fender and the corner plate, apply body sealer to the end of the panel mating
surface to the area indicated by bold dotted lines in the figure.
• Drill holes for the plug welding before installing the new parts. The welding point of the location indicated
by (B) is the same as the beginning of the plug weld on the 11 locations indicated by (C).
Caution
• Adjust the corner plate and rear fender so that the gap is 0.8 mm{0.031 in} or less to prevent water
penetration.
• Apply body sealer to all areas of the corner plate assembly using a spatula.
REAR DECK PANEL
REAR FENDER PANEL
2
amxuub0000000
09-80B–57
09-80B