Operation and Configuration
Offset Configuration via Programming
The following offset adjustments are usually
unnecessary. Almost all adjustments are electrical in
nature due to the printer's advanced self-aligning and
balancing design features. However, if adjustments
are needed, they can be sent as commands to the
printer. Consult with a SATO representative for
information on programming the MB200/201i printer,
or refer to the Programming Reference guide found
on the CD-ROM.
POSITION ADJUSTMENTS
Adjustment
Method
Printer Setting
Use
the
Commands
programming
command.
Base Point Offset
Pitch Offset
Dispense Offset
Tear-Off Offset
Base Point Offset
Use
programming
command.
Description
<PG>
Saves the values
to the Flash ROM.
the
<A3>
Takes effect
instantly; the value
is cleared once
the power is
turned off.
3-17