SATO MB200i Operator's Manual page 29

Installing the label roll (cont'd)
3. Insert the media roll into
the printer and ensure the
first label emerges from
the bottom of the roll.
4. Lift the label guide dial
cover upward and turn
until the label guides
barely makes contact with
the media roll.
5. Manually rotate the media
roll to confirm that it
moves smoothly.
Otherwise, the paper may
not be correctly fed during
operation. Close the dial
cover.
* When replacing a label
roll of the same width as
that used previously,
adjustment of the label
guide is not necessary.
Setup
Ensure that the first label
emerges from the bottom
of the roll.
2-15