Printing Via The Rs-232C Interface - SATO MB200i Operator's Manual

Operation and Configuration

Printing via the RS-232C Interface

Use the following procedure to print by connecting to
a computer or a handheld device through an RS-
232C cable option.
1. Open the cover to expose the
RS-232C interface port.
2. Plug one end of the RS232C
cable firmly into the port.
Ensure the connector's arrow
mark aligns with the printer's.
3. Plug the opposite end of the RS232C cable to the
host computer or handheld device.
For proper dipswitch configuration, refer to chapter 4.
3-3