SATO MB200i Quick Manual
  1. Manuals
  2. Brands
  3. SATO Manuals
  4. Barcode Reader
  5. MB 200i
  6. Quick manual

SATO MB200i Quick Manual

Hide thumbs Also See for MB200i:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Quick Manual
Barcode Printer
Quick Guide
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9

Advertisement

Table of Contents
loading

Related Manuals for SATO MB200i

Summary of Contents for SATO MB200i

  • Page 1 Barcode Printer 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9...
  • Page 2 Introduction This manual is intended to help you become familiar with the basic operation of MB200i/MB201i the barcode printer in a short time. Please read this manual carefully to make full use of the functions of MB200i/MB201i. Notes Reproduction of all or part of this manual is prohibited without permission of the copyright owner.

  • Page 3: Table Of Contents

    Installing and removing the Battery Pack . 23 Using AC Adapter ........25 Setting Labels ........26 • Continuous mode ......26 Operation Test Printing ..........28 Reference ..........29 Options ..........29 Reference DIP Switch ..........30 Basic Specifications of MB200i/MB201i . 33...

  • Page 4: Safety Precautions

    1. Safety Precautions In this section, safety precautions about printer operation are explained to ensure proper care and usage. Make sure to read these carefully before using your printer. Markings and Symbols The following symbols or markings are used in this manual and on the printer so that you can properly use the printer, and to prevent any damage to property, harm or injury to yourself and others.
  • Page 5 Symbol examples The triangle ( ) indicates something you should take absolute care with. The cautions are indicated concretely within the symbol. The symbol on the left indicates a risk of electric shock. A circle with a diagonal line ( ) indicates something you should not do.
  • Page 6 Warning Liquid Do not place any container with water or chemicals, such as flower vase or cup, as well as small metallic objects, near the printer. If any of these should fall into the printer, immediately turn off the power and contact your nearest dealer or service center.
  • Page 7 Warning Abnormal Conditions Continued use of the printer while it is emitting smoke or strange odors creates the danger of fire or electric shock. Immediately turn off the power and contact your nearest dealer or service center. Do not try to service the printer by yourself.
  • Page 8 Warning AC Adapter/Battery Charger (Option) • Use only the specified voltage. Using a different voltage may create the danger of fire or electric shock. • Use only the specified battery charger. Using a different battery charger may create the danger of fire or electric shock.
  • Page 9 Caution Location Do not locate the printer in the area subjected to high humidity or dew. If dew forms inside the printer, immediately turn off the printer and do not use it until it has been dried up. Continued use creates the danger of electric shock or the printer damage.
  • Page 10 Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Changes or modifications not expressly approved by the manufacturer for compliance could void the user's authority to operate the equipment.
  • Page 11 Warning This manual show that both the specification of Bluetooth and wireless LAN. Please refer to the corresponding section which shows specification of Bluetooth or wireless LAN. Wireless LAN specification. The available scientific evidence does not show that any health problems are associated with using low power wireless devices.
  • Page 12 Caution Replacing the Battery Pack • Use only the specified battery pack. • When replacing the battery pack, make sure to install the pack with the correct direction. Incorrectly replacing the battery create the danger of injury or damage to surrounding areas. •...

  • Page 13: Precautions In Use

    Precautions in Use Do not place the printer in a hot or cold place. The operation temperature range is -15 to 50°C (Wireless LAN model: 0 to 50°C). Do not place the printer in an area with high humidity or at the temperature outside the specified range.
  • Page 14 RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's website www.hc-sc.gc.ca/rpb" CE Caution: Hereby, SATO CORPORATION declares that this WM-B- AG-02 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Bluetooth Specification Wireless LAN specification.

  • Page 15: Unpacking

    2. Unpacking After unpacking, make sure that all the printer components are present. If any component or part is missing, contact your nearest dealer or service center. Quick guide Printer Battery pack Shoulder belt * Belt holder has already installed on the printer when shipping. Shape of cushioning material (protecting bad, etc.

  • Page 16: Parts Name

    3. Parts Name Label ejection Open cover Easy cutter Cover open/close lever Dispenser unit RS-232C cover Label guide adjust dial cover Battery cover Cover for DC input jack Belt clip...
  • Page 17 Platen Label width scale Label guide Label guide adjust dial LCD * POWER key RS-232C connector PRINT key FEED key IrDA filter Battery indicator (LED) * DIP switch STATUS (LED) DC input jack Operation panel with LCD is built in the wireless LAN interface model only (for manufacture option).

  • Page 18: Name And Function Of Controls

    Name and Function of Controls RS-232C Interface: Connects to Belt clip: Used when hanging the PC or handy terminal. Used for printer on your belt. connecting to a computer. * Do not hang the printer on to Signal:Low level -6.6 to +6.6 V anything but a belt.

  • Page 19: Before Starting

    4. Before Starting Charging the Battery Pack IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS. DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. • For connection to a supply not in the U.S.A, use an attachment plug adapter of the proper configuration for the power outlet.
  • Page 20 Plug one end of the power cord to the battery charger and the other to the wall outlet. (POWER lamp lights red.) Put the battery pack on the battery charger and then slide it in the direction of the arrow. Charging starts and the CHARGE lamp lights orange.
  • Page 21 Charging Time It takes about 2.5 hours for the battery pack to reach full charge from a fully discharged state. Notice • If the POWER lamp does not light at the start of charging, check the power cord connection. • If the CHARGE lamp does not light at the start of charging, make sure the battery pack is firmly mounted to the battery charger.
  • Page 22 • Using the AC adapter (option) to charge the battery pack The battery pack can be charged while it is mounted in the printer. • Use AC adapter Model No. PT/MB200-ADP (Sunfone Electronics Co., Ltd. Model No. ACML-06) Open the cover for DC input jack and insert the DC output terminal.

  • Page 23: Installing And Removing The Battery Pack

    Installing and removing the Battery Pack Open the battery cover. Insert the battery pack Terminals while pressing and holding the gray hook and close the battery cover. Insert the battery pack with the terminal side toward the printer. When removing the battery, press and hold the gray hook and then pull the tape.
  • Page 24 * Make sure to turn the printer power off when removing or replacing the battery. When the printer is turned off, the STATUS LED goes off. Do not remove the battery while the STATUS LED is on. Remove the battery when the STATUS LED is off.

  • Page 25: Using Ac Adapter

    Using AC Adapter Follow the procedure below to use the printer with the AC adapter (option). Open the cover for DC input jack and insert the DC output terminal. AC adapter Plug the AC adapter to the wall outlet. DC input jack DC output terminal * Be sure to turn the printer power off when removing the DC output terminal of AC adapter or disconnecting...

  • Page 26: Setting Labels

    Setting Labels The method of setting label may vary depending on the print mode. Continuous mode Labels Journal Slide the Cover Open/ Close lever in the direction of arrow to open the cover. If you are using the printer in Dispense mode, lifting the change lever, slide the dispenser unit until stops .
  • Page 27 Open the label guide adjust dial cover and turn the dial till the label guide fits with label roll. Label guide adjust dial Turn the label roll lightly by the hand and confirm that it rotates smoothly. If a drags is felt, paper may not be fed correctly.

  • Page 28: Test Printing

    5. Test Printing Pressing and holding the FEED key, set the POWER key . The P O W printer enters the test P R I mode. Press the FEED F E E key again to start test printing. Verify the following using the output of the test printing.

  • Page 29: Reference

    6. Reference Options User Option Battery Pack (Supplied with the printer) Preparing a spare battery pack will insure uninterrupted operation Model No. PT/MB200-BAT due to Low Battery. Battery Charger (Single-socket) Charges the battery pack. Model No. PT/MB200-CHG Battery Charger (Five-socket) Charges the battery pack (up to five packs).

  • Page 30: Dip Switch

    AC Adapter Used to supply power from domestic power supply. The DC output terminal of the AC adapter is connected to the Model No. PT/MB200-ADP printer. (Sunfone Electronics Co., Ltd. Model No. ACML-06) • Be sure to use the specified AC adapter. •...
  • Page 31 DIP Switch Setting DIP switch Starting mode Cover PRINT FEED Interface Description Close RS-232C Normal print mode Close User test print mode Close RS-232C HEX dump mode Open Auto peeling mode Open Manual print mode Close Bluetooth Normal print mode interface/ Wireless interface...
  • Page 32 DIP switch Starting mode Cover PRINT FEED Interface Description Open Head check (Barcode print area) designation Open Head check clear Open Online command designation (Petit lapin compatible) Open Online command designation (SBPL command)

  • Page 33: Basic Specifications Of Mb200I/Mb201I

    Basic Specifications of MB200i/MB201i Item Description Printing system Thermal printing system Head density 8 dots/mm (203 dpi) Maximum print area 48 mm (width) x 160 mm (pitch) Print speed 103 mm/s max. (The speed varies depending on print duty and environment of use.)
  • Page 34 1 to 6 times Rotation of character 0°, 90°, 180°, 270° Character type SATO standard font: X20, X21, X22, X23, X24, OCR-A, OCR-B, POP character Kanji: 16 x 16, 22 x 22, 24 x 24 Square Gothic (JIS Level 1, Level 2)
  • Page 35 Item Description Waterproof feature Rainproof type (JIS protection class 3), Shoulder rainproof cover (option) installed. * Removed when communication cable is connected. Environmental Operating ambient temperature: -15 to 50°C condition (including (Wireless LAN model: 0 to 50°C) battery pack) Humidity: 20 to 80% without condensation Storage ambient temperature: -25 to 60°C Humidity: 20 to 80% without condensation Environment for paper is excepted.

This manual is also suitable for:

Mb201i

Table of Contents