Maintaining The Split/Splitless Inlet; Consumables And Parts For The Split/Splitless Inlet - Agilent Technologies 5975T LTM GC/MSD Troubleshooting And Maintenance Manual

11

Maintaining the Split/Splitless Inlet

Consumables and Parts for the Split/Splitless Inlet

\<space>
Table 8 Split, splitless, direct, and direct connect inlet liners
Mode
Split
Split
Split—Manual only
Split—Manual only
Splitless
Splitless
Splitless
Splitless—Direct inject
Splitless—Direct inject
Direct inject —Headspace or
purge and trap
Direct column connect
Direct column connect
Table 9 Nuts, ferrules, and hardware for capillary columns
Column id Description
(mm)
.530 Ferrule, Vespel/graphite, 0.8-mm
id
Ferrule, graphite, 1.0-mm id
Column nut, finger-tight (for
0.53-mm columns)
.320 Ferrule, Vespel/graphite, 0.5-mm
id
Ferrule, graphite, 0.5-mm id
Column nut, finger-tight (for
.100- to .320-mm columns)
168
See the Agilent catalog for consumables and supplies for a more
complete listing, or visit the Agilent Web site for the latest
information (www.agilent.com/chem/supplies).
Description
Low-pressure drop, glass wool, single taper, 870 µL
Glass wool, 990 µL
Empty pin and cup, 800 µL
Packed pin and cup, 800 µL
Single taper, glass wool, 900 µL
Single taper, no glass wool, 900 µL
Dual taper, no glass wool, 800 µL
2-mm id, quartz, 250 µL
2-mm id, 250 µL
1.5-mm id, 140 µL
Single taper, splitless 4-mm id
Dual taper, splitless 4-mm id
Typical use
0.45-mm and 0.53-mm capillary
columns
0.53-mm capillary columns
Connect column to inlet or detector
0.32-mm capillary columns
0.1-mm, 0.2-mm, 0.25-mm, and
0.32-mm capillary columns
Connect column to inlet or detector
Deactivated Part number
Yes 5183-4647
No 19251-60540
No 18740-80190
No 18740-60840
Yes 5062-3587
Yes 5181-3316
Yes 5181-3315
No 18740-80220
Yes 5181-8818
No 18740-80200
Yes G1544-80730
Yes G1544-80700
Part number/quantity
5062-3512 (10/pk)
5080-8773 (10/pk)
5020-8293
5062-3514 (10/pk)
5080-8853 (10/pk)
5020-8292
Troubleshooting and Maintenance Guide