Displaying And Maintaining Multicast Vpn; Multicast Vpn Configuration Examples - HP MSR2003 Configuration Manual

Step
4. Configure the device as a route
reflector and specify its peers
or peer groups as clients.
5. Disable
between clients.
6. Configure the cluster IDs of the
route reflectors.

Displaying and maintaining multicast VPN

Execute display commands in any view and reset commands in user view.
Task
Display BGP MDT peer group
information.
Display information about BGP
MDT peers or peer groups.
Display BGP MDT routing
information.
Display information about BGP
update groups for the BGP IPv4
MDT address family.
Display data-group information
received by the specified VPN
instance in the MD.
Display data-group information
sent by the specified VPN instance
in the MD.
Display the default-group
information.
Reset the BGP sessions for the BGP
IPv4 MDT address family.
NOTE:
For more information about the display bgp group, display bgp peer, display bgp update-group, and
reset bgp commands, see

Multicast VPN configuration examples

This section provides examples of configuring multicast VPN on routers.
Command
peer { group-name | ip-address }
reflect-client
route reflection
undo reflect between-clients
reflector cluster-id { cluster-id |
ip-address }
Command
display bgp group ipv4 mdt [ group-name group-name ]
display bgp peer ipv4 mdt [ { ip-address | group-name group-name }
log-info | [ ip-address ] verbose ]
display bgp routing-table ipv4 mdt [ route-distinguisher
route-distinguisher ] [ ip-address [ advertise-info ] ]
display bgp update-group ipv4 mdt [ ip-address ]
display multicast-domain vpn-instance vpn-instance-name data-group
receive [ brief | [ active | group group-address | sender source-address
| vpn-source-address [ mask { mask-length | mask } ] | vpn-group-address
[ mask { mask-length | mask } ] ] * ]
display multicast-domain vpn-instance vpn-instance-name data-group
send [ group group-address | reuse interval | vpn-source-address [ mask
{ mask-length | mask } ] | vpn-group-address [ mask { mask-length |
mask } ] ] *
display multicast-domain [ vpn-instance vpn-instance-name ]
default-group
reset bgp { as-number | ip-address | all | external | group group-name
| internal } ipv4 mdt
Layer 3—IP Routing Command Reference
189
Remarks
By default, neither route reflectors
nor clients exist.
Optional.
By default, clients can reflect routes
with each other.
Optional.
By default, a route reflector uses its
router ID as the cluster ID.
.