HP MSR2003 Configuration Manual page 131

[RouterE-pim] quit
# On Router A, configure GigabitEthernet 2/1/2 of Router D as the static RP.
[RouterA] pim
[RouterA-pim] static-rp 192.168.1.2
[RouterA-pim] quit
# Configure the static RP on Router B, Router C, and Router D in the same way Router A is
configured. (Details not shown.)
Verifying the configuration
# Display PIM information on Router A.
[RouterA] display pim interface
Interface
GE2/1/1
GE2/1/2
GE2/1/3
# Display BSR information on Router A.
[RouterA] display pim bsr-info
Scope: non-scoped
State: Accept Preferred
Bootstrap timer: 00:01:44
Elected BSR address: 192.168.9.2
Priority: 64
Hash mask length: 30
Uptime: 00:11:18
# Display BSR information on Router E.
[RouterE] display pim bsr-info
Scope: non-scoped
State: Elected
Bootstrap timer: 00:01:44
Elected BSR address: 192.168.9.2
Priority: 64
Hash mask length: 30
Uptime: 00:11:18
Candidate BSR address: 192.168.9.2
Priority: 64
Hash mask length: 30
# Display RP information on Router A.
[RouterA] display pim rp-info
BSR RP information:
Scope: non-scoped
Group/MaskLen: 225.1.1.0/24
RP address
192.168.9.2
Static RP information:
RP address
192.168.1.2
NbrCnt HelloInt DR-Pri
0 30 1
1 30 1
1 30 1
Priority
192
ACL Mode
---- pim-sm
121
DR-Address
10.110.1.1
192.168.1.2
192.168.9.2
HoldTime Uptime
150 00:51:45
Preferred
No
(local)
Expires
00:02:22