Key Protection Switch Settings - Omron E5AJ-A2HB Operation Manual

Internal Switch Settings

2-3-6 Key Protection Switch Settings

The key protection switch is used to prohibit parameter changes as shown in the
following table. The key protection switch is factory-set to OFF.
Mode
Prohibits all set value changes except the set point. The Level
SP
Key is not available. The Down Key and Up Key are available
only for set point setting.
OFF All keys are available.
ALL Prohibits all set value changes. The Level Key, Down Key, and
Up Key are not available.
SP OFF ALL
PROTECT
Protection
Section 2-3
15