Omron E5AJ-A2HB Operation Manual page 10

Specifications
Indication method
Event input
Other function
Ambient operating temperature
Ambient operating humidity
Storage temperature
Output Units
Current Transformer (CT)
Item
E5AJ
E5EJ
E5CJ
Model
E53-R Relay Output Unit
E53-Q Voltage Output Unit
E53-Q3 Voltage Output Unit
E53-Q4 Voltage Output Unit
E53-C3 Linear Output Unit
E53-C3D Linear Output Unit
E53-V34 Linear Output Unit
E53-V35 Linear Output Unit
Note The E53-C cannot be used.
Item
Maximum continuous heater current
Dielectric strength
Vibration resistance
Weight
Specification
All digital indication (PV: Red, 15 mm; SV: Green,
10.5 mm)
All digital indication (PV: Red, 14 mm; SV: Green,
9.5 mm)
All digital indication (PV: Red, 12 mm, SV: Green 8.0
mm)
Contact input: ON: 1 kΩ max. OFF: 100 kΩ min.
No-contact input: ON: residual voltage of 3 V max; OFF:
current leakage of 1 mA max.
Key protect
Cooling operation/Heating operation
Heater burnout alarm
Model with event input (E5jJ-jB)
Set point selection (set point x 2)
RUN/STOP (E5AJ-jB and E5EJ-jB only)
–10 C to 55 C (with no condensation)
35 to 85%
–25 C to 65 C (with no condensation)
SPDT (SPST-NO when used with the
E5jJ), 5 A at 250 VAC (resistive load)
NPN, 40 mA at 12 VDC (with
short-circuit protection)
NPN, 20 mA at 24 VDC (with
short-circuit protection)
PNP, 20 mA at 24 VDC (with
short-circuit protection)
4 to 20 mA DC with a load of 600 Ω
max. (with a resolution of approximately
2600 when used with the E5jJ) (see
note)
0 to 20 mA DC with a load of 600 Ω
max. (with a resolution of approximately
2600 when used with the E5jJ)
0 to 10 VDC with a load of 1 kΩ min.
(with a resolution of approximately 2600
when used with the E5jJ)
0 to 5 VDC with a load of 1 kΩ min.
(with a resolution of approximately 2600
when used with the E5jJ)
50 A
1,000 VAC
50 Hz, approx. 98 m/s
E54-CT1: Approx. 11.5 g
E54-CT3: Approx. 50 g
Section 1-3
Specification
Specification
2
(10G)
5