Panasonic DMR-UBT1 Operating Instructions Manual page 83

Cannot output video in HDR quality (even
when connected to an HDR-compatible TV).
• When connected to a TV or terminal that does
not support HDR, this unit applies Dynamic
Range Conversion to HDR signals to output
them. In this case, "Dynamic Range Conversion
Output" is displayed on the screen. (
In addition, depending on the disc, it may not be
possible to output content in 2K resolution or
perform playback correctly. (
• Video may not be output from your TV in HDR
quality, depending on the content. Set "HDR
(High Dynamic Range) Output" and "HLG / PQ
Conversion" to "Automatic". (
3D video is not output correctly.
• 3D video may be output correctly by changing
the following settings:
- "Signal Format" (
playback)
• Check the settings of the connected TV.
• When a non-3D compatible amplifier/receiver is
connected between this unit and a TV, 3D video
is not output. ( 11)
• When "Audio Output" is set to "Off", 3D video
may not be output correctly. (
Cannot play back videos on the USB device
smoothly.
• Use the port on the front side of this unit, which
supports USB 3.0. You may be able to improve
the performance.
Sound
No sound.
Distorted sound.
• Check the connections. (
• Check the settings of the connected TV, etc.
• Press [AUDIO] to select the audio. (
• To output audio from a device connected with an
HDMI cable, set "Audio Output" to "On". (
Cannot change audio channel.
• You cannot change the audio channel if "Digital
Audio Output" is set to "Bitstream". (
There is no sound coming out.
• Refer to "Connection" (
audio output settings suited to the connections
of your device.
40)
42)
76, 77)
43, 3D settings during
77)
9)
22, 41)
74)
9 - 11) to check the
Recording, timer recording and
copying
Cannot record.
Cannot copy.
• Some broadcasts are copyright protected.
• You cannot record to the disc by pressing the
[REC ¥] or timer recording.
• The disc is protected. (
• [DVD-R] [DVD-RW] [+R] [+RW] Since it will copy to
HDD temporarily, copying is not possible if there
is insufficient available capacity on the HDD.
• This unit cannot record/copy NTSC signals to
discs that already have PAL signal recordings.
A part or whole of a recorded programme has
been lost.
• If there is a power failure or the AC mains lead is
disconnected from the household mains socket
while recording or editing, the programme may
be lost or the HDD may become unusable. We
cannot offer any guarantee regarding lost
programmes.
Timer recording does not work properly.
• When is displayed on the screen. (
Auto Renewal Recording does not work
properly.
• The programme will not be overwritten in the
following cases:
- the programme is protected
- any programme is being played back or copied
- a screen such as Video Menu is displayed
Instead, the programme will be saved as a
separate programme and that will be overwritten.
An unusually loud sound is coming from the
rotating disc.
77)
• If you want copy to perform more quietly, select
"Normal ( Silent )" in "Disc Speed for Copy".
( 73)
68)
30)
83
TQBS0146