Panasonic DMR-UBT1 Operating Instructions Manual page 65

Using Home Networking (DLNA) with
Wi-Fi Direct
®
Wi-Fi Direct is a standard that enables wireless
LAN devices to communicate each other directly
without a wireless broadband router.
This unit can be connected wirelessly and directly
to other DLNA compatible equipment on a
temporary basis, regardless of the network
connection and settings of this unit.
Connecting temporarily
Wi-Fi Direct compatible
equipment
1
Press [FUNCTION MENU].
2
Select "Wi-Fi Direct" in "Home Network",
then press [OK].
3
Select the item, then press [OK].
• Set up the device to be connected so that a
Wi-Fi Direct connection can be made. For
details, refer to the operating instructions
for the device to be connected.
4
Select the device to be connected, then
press [OK].
• If the device you want to connect to is not
displayed, switch the connection method
by pressing the yellow button.
5
When selected "DLNA Client":
Go to step 4 on page 63.
When selected "DLNA Server":
Operate the playback equipment (Client).
When selected "Media Renderer":
Operate the Digital Media Controller.
When no devices are found
If the corresponding device is not found even after
the search is run again, select "Next" and change
the connection method.
This unit
Select the connection method according to the
device to be connected.
Using Miracast
You can enjoy the content you are viewing on a
Miracast-compatible smartphone, etc. on the big
screen of your TV.
• Compatible with Android
above and Miracast certified.
For information on whether the smartphone, etc.
supports Miracast, contact the manufacturer of
the device.
Miracast compatible
equipment
1
2
3
To exit from Miracast
Press [EXIT
Wi-Fi Direct Connection
Device not found.
To connect with a Wi-Fi Direct compatible device,
please check connection mode of pairing device and
select "Search again".
To connect with a Wi-Fi Direct incompatible device,
please select "Next".
Search again
Next
OK
Wi-Fi Direct Connection
Please select connection method. Press RED button to
change the wireless type of connection with
the pairing device.
Press RETURN to finish.
Current Wireless type :
WPS (PUSH button)
WPS (PIN code)
Manual setting
Wireless type
OK
RETURN
®
TM
This unit
Press [FUNCTION MENU].
Select "Miracast" in "Home Network", then
press [OK].
Operate the Miracast compatible equipment.
].
802.11n/g/b (2.4GHz)
device, ver. 4.2 and
65
TQBS0146