Panasonic DMR-UBT1 Operating Instructions Manual page 30

To confirm and edit a timer
programme
1
Press [PROG/CHECK].
e.g.,
Timer Recording
Channel Name
Guide
Guide
New Timer Programme
OK
Total 3/32
RETURN
Delete Resolve overlap
2
Select the programme, then perform the
operations.
• Red: To delete a timer programme
• Green:
To resolve an overlap timer programme
- The overlapped timer recording list will
appear. ( 27)
• Yellow:
To deactivate a timer programme
- The timer icon "F" will change from red to
grey.
- Press the yellow button again to activate
timer recording standby. (The timer icon
"F" will change to red.)
• [STATUS ]: Show programme information
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to "Timer recording options". (
3 Press [OK].
To exit the timer recording list
Press [EXIT ].
30
TQBS0146
TUE 03.01.2017 XXXXX
Time Remaining 154:04 DR
Space
Schedule Mode
MON 13.01
OK
DR
XXXX - XXXX
MON 13.01
HG OK
XXXX - XXXX
MON 13.01
DR
XXXX - XXXX
TUE 07.01
DR
XXXX - XXXX
Info
Page Up
Page Down
Keyword List
Turn
Timer Off
Screen icons
Red: Timer recording standby is
Grey: Timer recording standby is
[
Currently recording programme
(Red)
A part or all of the programme will not
be recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was
not completed because of some
reason.
Auto Renewal Recording is set.
( 29)
Guide Link (
Series Timer Recording (
Displayed if the recording can fit in the
OK
remaining space
Daily or weekly timer programme is set.
• The timer remains active until the
(Date)
date indicated below
It may not be possible to record
because:
- there is not enough space left.
- the number of possible programmes
29)
has reached its maximum. (
- programmes are deactivated, etc.
• Programmes to be recorded with Keyword recording (
are not displayed.
activated.
deactivated.
29)
28)
.
18)
31)