Panasonic DMR-UBT1 Operating Instructions Manual page 45

Picture Settings
Picture Settings
Picture Type ture Type
During BD-Video playback,
Sharpness Adjustment arpness Adjustment
these icons switch to the
Noise Reduction se Reduction
Luminance/Colour Adjustment minance/Colour Adjustment
ones for BD Video content.
Bandwidth Limitation ndwidth Limitation
Dynamic Range Conversion Adjustment namic Range Conversion Adjustment
24p / 25p Conversion p / 25p Conversion
Progressive ogressive
Reset to Default Picture Settings set to Default Picture Settings
Switch "Set 1", "Set 2" or "Standard" by using
[2, 1].
• You can register desired settings to "Set 1" and
"Set 2". Settings for BD Video playback and
settings for the playback of other types of media
are registered separately.
(The default settings for "Set 1"/ "Set 2" are the
same as the settings for "Standard".)
• You cannot change the "Standard" settings.
Picture Type
Select the picture quality mode during play.
Sharpness Adjustment
Noise Reduction
Luminance/Colour Adjustment
Adjust the contrast, brightness, tone curve
(white/black) colour saturation and hue.
Bandwidth Limitation
Adjusts the bandwidth limitations.
Dynamic Range Adjustment
Adjusts the brightness of the entire screen
when HDR (High Dynamic Range) video is
output.
Dynamic Range Conversion Adjustment
When this unit is connected to a TV that does
not support HDR (High Dynamic Range) input,
HDR video is output converting to a SDR
(Standard Dynamic Range) video signal. If you
set a smaller value, their contrast will be
reproduced more faithfully, but the entire
screen will appear darker. To increase the
brightness, set a larger value.
Set 1 Set 1
Normal Norma Norma Norma Normal a a a a a l
Off Off
Auto Auto
Set 1
24p / 25p Conversion
Plays back videos with film-like motion.
• This function is available on the following
conditions:
- "Video Format" set to "Automatic", "4K",
"1080i" or "1080p"
§
Only for 24p Conversion
§
- Connect 24p/25p compatible TV.
• Noise may appear on the image when you
switch the setting.
Progressive
Select the method of conversion for
progressive output to suit the type of content
being played.
• Auto
Automatically detects the film and video
content, and appropriately converts it.
• Video
Select this setting when the content is
distorted if "Auto" is selected.
• Film
Select this if the edges of the film content
appear jagged or rough when "Auto" is
selected. However, if the video content is
distorted, then select "Auto".
Reset to Default Picture Settings
Restores the default settings of the Picture
Settings menu.
( 76)
§
45
TQBS0146