Panasonic DMR-UBT1 Operating Instructions Manual page 48

Blu-ray disc recorder
Table of Contents

Advertisement

Dividing programme
[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]
1 Select "Divide Programme" in "Edit", then
press [OK].
2 Press [OK] at the point to divide the
programme.
• You can find the desired point by using play,
search, etc. (
40)
3 Select "Continue", then press [OK].
4 Select "Divide", then press [OK].
To confirm the division point
After performing step 2.
Select "Preview", then press [OK].
• The unit plays 10 seconds before and after the
division point.
To change the division point
After performing step 2.
Restart play and select "Divide", then press [OK]
at the division point.
• [HDD] [USB_HDD] Divided programmes will become a group
of programmes.
Picture Quality Change
[HDD] [USB_HDD]
The Picture Quality Change function changes the
recording mode of programmes in DR mode or
AVCHD format. Programmes will be smaller in
size after their recording mode is changed. It
takes about the same amount of time as
recording to change the mode.
1 On the Video Menu screen (
Select the programme in DR mode or the
AVCHD content.
• Multiple selection (
2 Press [OPTION].
3 Select "Picture Quality Change" in "Edit", then
press [OK].
48
TQBS0146
47):
47)
e.g.,
Picture Quality Change
Change picture quality of the selected programme.
Please select picture quality and other options, then press OK.
Picture Quality
Subtitles
Timing
4 Set the picture quality change options, then
press [OK].
Picture Quality (
• [USB_HDD] You cannot select XP, SP and LP
mode.
Subtitles:
• Automatic
Subtitles will be recorded if they are included
in the programme.
• Off
Subtitle will not be recorded.
Timing:
• Now
A picture quality change starts immediately
after step 6.
• Time recordings cannot be made while a
picture quality change is in progress.
• During standby
A picture quality change starts after the unit
is switched to standby mode.
5 Select the item below, then press [OK].
Delete:
The original programme will be deleted to save
the storage capacity of the HDD after the
picture quality is changed.
Keep:
The original programme is retained even after
the picture quality is changed.
6 If you have selected "Now":
Select "Start", then press [OK].
If you have selected "During standby":
Press [OK].
• Picture quality change will be performed
after the unit is switched to standby mode.
"COPY" or "CONV" on the front panel display stay
lit while a picture quality change is in progress.
HL -- Longer Play
Off
During standby
OK
RETURN
19):

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents