Panasonic DMR-UBT1 Operating Instructions Manual page 34

Connecting the USB HDD
Connect this unit with optional USB HDD.
e.g.,
• Only one USB HDD (For recorded
programmes, 19) can be connected at the
same time.
• The USB HDD can be connected to the USB
port on the rear of this unit.
Registering the USB HDD
• If the registering screen appears when
connecting the USB HDD, go to step 5.
1
Press [FUNCTION MENU].
2
Select "Basic Settings" in "Setup", then press
[OK].
3
Select "Settings for USB HDD" in "HDD /
Disc / USB HDD", then press [OK].
4
Select "USB HDD Registration", then press
[OK].
5
Select "Yes", then press [OK].
6
When the registering is complete, message
screen appears.
Press [OK].
7
The confirmation screen appears.
Press [OK].
To cancel all USB HDD registrations (
• It is not possible to play back the content on the USB HDD
whose registration has been cancelled.
• You can check the registration number of the USB HDD on
the Video Menu. ( 35)
34
TQBS0146
This unit's rear panel
USB HDD
73)
Disconnecting the USB HDD
Disconnecting without following this procedure
may result in the loss of recorded content from
the USB HDD or the internal HDD.
1
Press [FUNCTION MENU].
2
Select "Basic Settings" in "Setup", then press
[OK].
3
Select "Settings for USB HDD" in "HDD /
Disc / USB HDD", then press [OK].
4
Select "USB HDD Disconnection", then
press [OK].
5
Select "Yes", then press [OK].
6
Disconnect the USB HDD from this unit.