Panasonic DMR-UBT1 Operating Instructions Manual page 75

BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If "Off" is selected, the unit outputs the primary
audio only.
• To enjoy BD-Video that supports
DTS:X
TM
Connect this unit to an AV amplifier or receiver that
supports it with an HDMI cable, and select the following
settings:
- Dolby D / Dolby D + / Dolby TrueHD: "Bitstream"
- DTS / DTS-HD: "Bitstream"
- BD-Video Secondary Audio: "Off"
Dolby Atmos is a trademark of Dolby Laboratories.
HDMI Output Settings of Music Playback
Select the HDMI output settings.
• If "Sound Quality Priority" is selected, the audio
noise is minimised during music playback by
automatically switching the video output to
1080i.
Settings for High Clarity Sound
This function is effective when "High Clarity
Sound" ( 46) is set to "On (Video Off)" or "On
(Video On)".
Audio Output
Select the terminal from which you want to
output audio signals. (
• Set an option for video playback and audio
playback.
Front Panel Display
Select whether or not to turn on/off the front
panel display.
• Set an option for video playback and audio
playback.
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Dolby Atmos or
R
9 - 11)
Audio Type for Digital Broadcast
If the programme has more than one track (Dolby
Digital, etc.), you can set priorities.
• This setting will give effect in the following
conditions.
- The default setting when watching
broadcasts.
- The default setting when playing back the
programme recorded in DR mode.
- Picture Quality Change (
- Copy (Change Picture Quality) from the
programme recorded in DR mode. (
Audio for HG / HX / HE / HL / HM Recording
If the programme has multi channel audio
(5.1 ch or 2 ch), priority is given to what you
select.
• This setting will give effect in the following
cases.
- Timer recording (
- Picture Quality Change (
- Copy (Picture Quality Change) in HG, HX,
HE, HL or HM mode from a programme
recorded in DR mode. (
Display
On-Screen Information
Select the time until the Channel Information
screen ( 22) disappears automatically.
Front Panel Display
Changes the brightness of the front panel display.
Screen Saver
This is to prevent image retention on the screen.
Teletext
Select the Teletext (
48)
50)
27)
48)
52, 54)
22) display mode.
TQBS0146
75