Important Two-Component Material Information; Isocyanate Conditions; Material Self-Ignition; Keep Components A (Red) And B (Blue) Separate - Graco HFR Setup And Operation Manual

Important Two-Component Material Information

MOVING PARTS HAZARD
Moving parts can pinch, cut or amputate fingers and other body parts.
• Keep clear of moving parts.
• Do not operate equipment with protective guards or covers removed.
• Pressurized equipment can start without warning. Before checking, moving, or servicing equip
ment, follow the Pressure Relief Procedure and disconnect all power sources.
BURN HAZARD
Equipment surfaces and fluid that's heated can become very hot during operation. To avoid severe
burns:
• Do not touch hot fluid or equipment.
Important Two-Component Material Information

Isocyanate Conditions

Spraying or dispensing materials containing isocya
nates creates potentially harmful mists, vapors, and
atomized particulates.
Read material manufacturer's warnings and material
MSDS to know specific hazards and precautions
related to isocyanates.
Prevent inhalation of isocyanate mists, vapors, and
atomized particulates by providing sufficient ventila
tion in the work area. If sufficient ventilation is not
available, a supplied-air respirator is required for
everyone in the work area.
To prevent contact with isocyanates, appropriate per
sonal protective equipment, including chemically
impermeable gloves, boots, aprons, and goggles, is
also required for everyone in the work area.

Material Self-ignition

Some materials may become self-igniting if applied
too thickly. Read material manufacturer's warnings
and material MSDS.
20
WARNING
Keep Components A (Red) and
B (Blue) Separate
Cross-contamination can result in cured material in
fluid lines which could cause serious injury or dam
age equipment. To prevent cross-contamination of
the equipment's wetted parts, never interchange
component A (Red) and component B (Blue) parts.
313997ZAA