Table of Contents
Advertisement
ATT6800G-QSG-d02.qxd
Getting Started
Step 1:Verify Internet access
Before you begin, launch your web browser to make sure you can connect to the
Internet. If you cannot connect to the Internet, check your modem connections, con-
sult the User Manual provided by your broadband service supplier, or call your
Internet service provider for assistance.You must have Internet access before installing
the router.
Step 2: Install router
1 Connect power adapter
Connect the power adapter to the
router, then plug it into an electri-
cal outlet not controlled by a wall
switch.
2 Connect router to computer
Unplug the Ethernet cable from
your modem, then plug it into the
LAN 1 port of the router.
3 Connect router to modem
Use the supplied Ethernet cable to
connect the modem to the WAN
port of the router.WAN stands
for Wide Area Network (Internet).
4 Check lights & connections
Before proceeding, make sure all
connections match the diagram at
right. Check the front of the
router to make sure the Power,
WAN and LAN1 lights are on (see
page 14).
AT&T Plug&Share
11/6/2003
2:23 PM
54 Mbps Wireless Router 6800G
™
Page 6
Rotate antenna to fully
upright position
Ethernet
Cables
Power Adapter
Computer
Modem
6
Advertisement
Table of Contents
