Table of Contents
Advertisement
ATT6800G-QSG-d02.qxd
11/6/2003
2:24 PM
Page 11
Setup Wizard
Security Wizard: Set Admin Password
You can protect your network settings by entering a password here. Only those who
know the password will be allowed to change network settings.
Enter your password twice.
Symbols will replace your key
strokes on the screen.The pass-
word can be up to 15 charac-
ters long.The password is case
sensitive (i.e.,"cat" and "Cat" are
not the same).
Click Next to display the WEP
Encryption screen (see below).
NOTE: Remember your pass-
word. It will be required for
access to all router settings.
Set WEP Encryption
WEP (Wired Equivalent Privacy) helps protect your privacy by encrypting wireless data.
WEP: Click On to activate WEP.
WEP Encryption: Select
encryption strength from the drop
down menu (64, 128 or 152-bit).
Larger numbers will make your
system more secure, but may
result in slower data transfer.
Security Phrase: Enter a
security phrase. (You must enter
five characters for 64-bit, 13
characters for 128-bit, or 16
characters for 152-bit.) Every
wireless device on the network
must match these WEP settings.
Click Next to continue.
AT&T Plug&Share
54 Mbps Wireless Router 6800G
11
™
Advertisement
Table of Contents
