Wireless Lan Connection Screen; Setup Completed - AT&T Plug&Share 6800G Quick Start Manual

ATT6800G-QSG-d02.qxd 11/6/2003 2:24 PM Page 10
Setup Wizard
Set Wireless LAN Connection
This screen displays the default settings for your wireless network.
SSID (Service Set Identifier)
provides security protection.
The default SSID is at&t.You
should change this to any name
up to 32 characters long.The
SSID is case sensitive (i.e.,"cat"
and "Cat" are not the same).All
wireless network devices must
use the same SSID.
Channel: Click to choose any
channel from 1 to 11. (Default is
6.) All wireless network devices
must use the same channel.
Click Next to continue.

Setup completed

Click Run Security Wizard to
set up enhanced security and
privacy protection (see page 11).
Click Back if you want to
change any settings.
Click Save Settings to end the
setup session now. (You will
then be prompted to verify
Internet access.)
Connection problems?
If there is no response when you click your web browser's Home button, try the
suggestions on page 13.
AT&T Plug&Share 54 Mbps Wireless Router 6800G 10
™