Set Internet Connection Type; Set Dynamic Ip Address - AT&T Plug&Share 6800G Quick Start Manual

ATT6800G-QSG-d02.qxd 11/6/2003 2:24 PM Page 8
Setup Wizard
Internet Connection Type
Next, choose an Internet connection type (you will be allowed to choose only one). If
you are not sure which to choose, ask your Internet Service Provider. After you make
a selection, press Next to display a setup screen for the option you've chosen.
Dynamic IP Address: Cable
modems usually require this
setting. Choose this setting if
you don't have to log on to the
Internet when you turn on your
computer.
PPPoE: DSL modems usually
require this setting. Choose this
setting if you have to log on to the
Internet when you turn on your
computer.
Static IP: This setting is rarely
required. Contact your ISP
before choosing this option.

Set Dynamic IP Address

This screen appears if you select Dynamic IP Address as your Internet connection type.
Host Name: If your ISP
requires that you enter a host
name, enter it here.
MAC (Media Access Control):
The address of your computer's
network adapter should appear
here as the default. It is usually
not necessary to change it.
Click Next to display the
Wireless LAN Connection
screen (see page 10).
AT&T Plug&Share 54 Mbps Wireless Router 6800G 8
™