Set Pppoe; Set Static Ip Address - AT&T Plug&Share 6800G Quick Start Manual

ATT6800G-QSG-d02.qxd 11/6/2003 2:24 PM Page 9
Setup Wizard

Set PPPoE

This screen appears if you select PPPoE as your Internet connection type.
Enter the user name and pass-
word you use for access to your
Internet Service Provider.
If your ISP requires you to use a
service name, enter it in the last
text field.
Click Next to display the
Wireless LAN Connection
screen (see page 10).

Set Static IP Address

This screen appears if you select Static IP Address as your Internet connection type.
Delete anything that appears in
these fields when the screen is
displayed, then enter the WAN
and DNS addresses provided by
your ISP.
Click Next to display the
Wireless LAN Connection
screen (see page 10).
AT&T Plug&Share 54 Mbps Wireless Router 6800G 9
™