Static Ip Address Screen; Wireless Lan Connection Screen; Setup Completed - AT&T Plug&Share 6800G User Manual

Setup Wizard
Basic > Advanced > Admin > Status > Shortcuts > Help
Wizard
Wireless
ISP Connection
DHCP
Set Wireless LAN Connection
This screen displays the default settings for your wireless network.
SSID (Service Set Identifier): This feature pro-
vides protection against unauthorized access to
your network. The default SSID is at&t. You
should change this name to any alphanumeric
(numbers and/or letters) identifier up to 32 char-
acters long. All wireless adapters on your net-
work must use the same SSID as your wireless
router and/or access point. The SSID is case
sensitive (i.e., "cat" and "Cat" are not the same).
Channel: Click to choose any channel from 1 to
11. (Default is 6.) All wireless devices on the
network must be set to the same channel.
Click Next to display the Setup Completed screen.
CAUTION: SSID and Channel number must be identical in all wireless network devices.

Setup completed

Click Run Security Wizard to provide privacy
for your wireless network and help protect
against unauthorized access (see next page).
Click Back if you want to change any
settings.
Click Save Settings to end the setup session
now. (See Close Wizard description, page 12.)
AT&T Plug&Share 54 Mbps Wireless Router 6800G 10
™