11.3.1.3
OPERATING PROCEDURE
1. Enable or disable cooling/heating selector.
○
Choose SW
1 or
○
By choosing
2. Choose either the fan operation or the cooling/heating operation.
○
Choose SW
3 or
○
Choose
3 for the fan operation, and choose
By choosing
3. Choose either the cooling operation or the heating operation.
○
Choose SW
5 or
○
Choose
5 for the cooling operation, and choose
By choosing
By choosing
11.3.1.4
CHECK AFTER COMPLETING INSTALLATION
Check the signals to make sure the each setting switch operates properly.
○
Be sure that choosing
○
2 .
1 , the set operations are turned OFF, and by choosing
○
4 .
○
3 , the wired remote control indicates priority to the fan operation.
○
6 .
○
5 , the wired remote control indicates priority to the cooling operation.
○
6 , the wired remote control indicates priority to the heating operation.
2 to enable cooling/heating selector.
○
4 for the cooling/heating operations.
○
6 for the heating operation.
102
○
2 , the set operations are turned ON.