Table of Contents
Advertisement
BNC-2090A Overview
1
You can also use the BNC-2090A with PCI-6013 and PCI-6014 B Series devices.
© National Instruments Corporation
This user manual contains in-depth information about using the National
Instruments BNC-2090A.
The BNC-2090A is a desktop or rack-mount analog breakout accessory
you can connect to E/M Series multifunction DAQ devices
BNC-2090A has the following features:
•
16 analog input (AI) BNC connectors for eight differential
or 16 single-ended channels
•
Two analog output (AO) BNC connectors
•
Two user-defined BNC connectors
•
One APFI BNC connector
•
One PFI BNC connector
•
Spring terminal block for digital input/output (DIO) and
Programmable Function Interface (PFI) connections
•
Silkscreened component locations for resistors and capacitors for
building single-pole highpass and lowpass filters and voltage dividers
•
Two 68-pin input/output (I/O) connectors for DAQ device connection
Refer to the BNC-2090A Quick Start Guide for basic installation and signal
connection instructions.
Figure 1-1 shows the front panel and enclosure back of the BNC-2090A.
1-1
1
1
. The
BNC-2090A User Manual
Hide quick links:
Advertisement
Table of Contents
