National Instruments BNC-2090A User Manual page 40

Appendix A Specifications
Power Requirement
Physical
Environment
Safety
BNC-2090A User Manual
+5 VDC (±5%) provided by DAQ device
Typical power consumed
by BNC-2090A................................10 mA
Maximum power available
at +5 V spring terminal....................1 A (fuse-limited by host
Dimensions .............................................4.39 × 48.26 × 9.7 cm
Weight ....................................................700 g (24.69 oz)
I/O connector ..........................................Two 68-position male connectors
BNC connectors......................................22
Spring terminal block .............................29 positions
The BNC-2090A is intended for indoor use only.
Operating temperature ............................0 to 70 °C
Storage temperature ................................–55 to 125 °C
Relative humidity ...................................5 to 90% RH, noncondensing
Pollution Degree (indoor use only) ........2
Maximum Altitude .................................2,000 m
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
DAQ device)
(1.73 × 19 × 3.82 in.)
A-2 ni.com