HP C2246 Technical Reference Manual page 17

I
\_)
Table 1-2. HP C2244/45/46/47 Operating Specifications (continued)
Acoustical Noise: Typical values measured as average sound pressure at one meter per ISO 7779;
converted to average sound power (in bels) per ISO 7779.
Idling:
·A-Weighted Sound Pressure: ......................................................
35 db(A)
Sound Power: ...................................................................... 4.6 bels
Seeking:
A-Weighted Sound Pressure: .....................................................
37 db(A)
Sound Power: ...................................................................... 4.8 bels
Safety
This product will be evaluated as a component (incomplete in nature) to the following
specifications. A complete test and evaluation program should be performed on the end use
.application.
IEC ................................................. 950, 1st Edition, Amendments 1 and
2
UL ....................................................................... 1950, 1st Edition
CSA ................................................................... C22.2 No. 950-M89
EN ............................................................................ 60950, 1988
TUV ................................................ EN 60950, 1988; DIN VDE 0805/05.90
DEMKO .................................................... EMKO-TUE (74-SEC) 203/91
Physical Characteristics
Unit Weight .................................................................. 1.0 kg (2.2 lbs)
Shipping Weight (Single-Unit Package) ........................................ 1.6 kg (3.5 lbs)
Shipping Weight (Ten-Unit Package) .......................................... 11.5 kg (25 lbs)
:,_,,: Dimensions:
Length ................................................................. 146.1 mm (5.75 in.)
Width ................................................................. 101.6 mm (4.00 in.)
Height .................................................................. 41.3 mm (1.63 in.)
(Dimensions exclude front bezel. Additional information is provided in Chapter 2.)
Product Specifications 1-7