Narrow, Differential Drive Configurations
wspdm202
~
l
f
1.625
(41.271
+----+·-·-·---+·-+-·- __
t
l
I
I
11~-.'-
i
1.625
I
tee
I
i
.248
I,.
(41.281
..,
I,..
(45.72l
.., I
I
16.30l
i
2.31s
I
.625
l..
!60.32)
... i
(15.881
3.75
(95.251
4.00
1101.60l
. . - - - - - i . - - -
___ . __
--i-----______
-·-------4·-·-·-·-·-·-
jJ .
Figure F·1. Narrow, Differential: Disk Drive Dimensions and Mounting Locations
Mounting Guidelines:
1.
Values given
in
inches a.nd (millimeters).
F
2. Maintain a minimum clearance of 0.06 in. (1.5 mm) between any system structure and the top and all four sides of
the disk drive. Insure that the system structure contacts only the drive mounting frames and clears the drive HOA
by
at
least 0.06 in. (1.5
mm).
3. Maintain a minimum clearance of 0.04 in. (1.0 mm) between any system structure and any PCA compoment.
4. Use 6-32 UNC screws with fiat washers under the heads and torque them to 15 inch-pounds.
5. When mollllded, the screws should not protrude more than 0.12 in. (3 mm) beyond the inside of the disk drive
mounting frame.
Narrow, Differential Drive Configurations F· 1