System Screen; Figure 6 - System Screens - York YK Series Operation Manuals

FORM 160.54-O1
ISSUE DATE: 9/10/2014
HEAD PRESSURE
AND
HEAT RECOVERY
ENABLED
HEAT PUMP
DUTY ENABLED

FIGURE 6 - SYSTEM SCREENS

OVERVIEW
This screen gives a general overview of common chill-
er parameters for both shells.
DISPLAY ONLY
Discharge Temperature
Displays the temperature of the refrigerant in its gas-
eous state at discharge of the compressor as it travels
to the condenser.
JOHNSON CONTROLS
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION

SYSTEM SCREEN

Chilled Liquid Temperature – Leaving
Displays the temperature of the liquid as it leaves the
evaporator.
Chilled Liquid Temperature – Return
Displays the temperature of the liquid as it enters the
evaporator.
Chilled Liquid Temperature – Setpoint
Displays the active temperature setpoint to which the
chiller is controlling the evaporator liquid. This value
LD14332
LD15424
2
25