After Use - GBC ThermaBind T500Pro Instruction Manual

Heating the document
The cover must be inserted into the binder so the
1
spine is in contact with the heating element (Fig.4).
The binding cycle will begin automatically and is
2
shown visually with LED lights.
After completion, the green light <<ready>> comes
3
on and at the same time an audible signal will be
heard. This audible signal will be repeated as long as
the document is left in the binding unit.
After the audible signal is heard, remove the
4
document immediately.
Note: if the document is left in the binding unit for
too long, the quality of binding could be affected.
The binding unit is now ready to receive the next
5
cover.
Allow the document to cool
and harden
Jog the complete document once firmly down its
1
spine. This ensures that every sheet is inserted into
the glue.
Hold the completed document in one hand and with
2
thumb and one finger, squeeze the back together
to ensure that the first and last sheets are properly
bound. This will also guarantee the correct U form of
the cover spine.
Place the bound document into the cooling rack
3
to allow adequate cooling. Should any sheets be
incorrectly bound please repeat the binding operation
(Fig.5).
Guarantee
Operation of this machine is guaranteed for two years
from date of purchase, subject to normal use. Within
the guarantee period, ACCO Brands Europe will at its
own discretion either repair or replace the defective
machine free of charge. Defects due to misuse or use
for inappropriate purposes are not covered under the
guarantee. Proof of date of purchase will be required.
Register this product online at www.accoeurope.com
Folding the score mark
Fold back the front cover along the score mark
1
as this will ensure easy opening of the completed
document.
Multiple binds
The binding process can be carried out with several
1
copies at the same time. The heating channel will
hold a combination of documents up to 45mm in
thickness.
Auto shut off
The machine will turn off 45 minutes after the last
1
binding operation. An automatic security system
turns <<Off>> the binding unit.

After use

When all binding is complete, press the on/off switch
1
once again, turning the machine off.
Remember to remove the plug from the electricity
2
supply when the machine is not in use.
Repairs or alterations made by persons not authorised
by ACCO Brands Europe will invalidate the guarantee.
It is our aim to ensure that our products perform to the
specifications stated. This guarantee does not affect
the legal rights which consumers have under applicable
national legislation governing the sale of goods.
G
5