Attach The Switch To A Pole Or Table Leg - NETGEAR GS408EPP Hardware Installation Manual

ProSAFE 8-Port Gigabit Ethernet Easy-Mount Switch GS408EPP

Attach the Switch to a Pole or Table Leg

The switch ships with rubber belts and a mount. You can attach the belts to a pole or table
leg, attach the mount to the belts, and click-attach the back or bottom of the switch to the
mount.

To install the switch to a rectangular pole or table leg:
1. Attach the supplied rubber belts to the supplied mount by pulling the belts through the
openings in the mount.
2. Strap the belts with the attached mount to the pole or table leg.
3. Line up the back or bottom of the switch with the mount.
4. Insert the mount's locking tab and hook into the notches on the back or bottom of the switch.
5. Slide the switch into the mount.
Installation
16