Chapter 1 Introduction - NETGEAR GS408EPP Hardware Installation Manual

Introduction
1.
The NETGEAR ProSAFE
Switch is specifically designed to "put your ports where you want them" to power your IP security
cameras, WiFi access points, or VoIP phones with PoE+ (802.3at) up to 30W per port.
This switch provides eight Gigabit ports in a unique form factor that can be wall mounted, pole
mounted, under table, ceiling air-duct, desktop, or 1U rack mounted with two units per 1U slot
with one facing forward and one facing the rear (all connections are on the front of the switch).
This hardware installation guide complements the installation guide that came with your switch.
The Resource CD that came with your switch includes software and additional documentation
and support resources.
This chapter serves as an introduction to the switch and includes the following sections:
• Hardware Features
• Safety Instructions and Warnings
Note: For more information about the topics that are covered in this manual,
visit the support website at support.netgear.com.
Note: For technical specifications, see the data sheet at
netgear.com/business/products/switches/web-managed.
For switch documentation, see the resource CD in the product
package or visit downloadcenter.netgear.com.
®
8-Port Gigabit Ethernet Easy-Mount GS408EPP Web Managed
4
1