Raymarine Pathfinder Radar Scanner Owner's Handbook Manual page 59

5. Ensure the exposed braid is positioned in they p-clip to provide an earth, then
clamp securely into position.
Secure the cable at the entrance to pedestal base using the plastic cable
clamp.
Hand tighten the cable gland nut.
.
6. The cable is supplied prepared and ready to fit to the signal and power con-
nectors. If you need to cut the cable to length, strip off the protective outer
sleeve then use the supplied kit to prepare the cable as detailed in the follow-
ing illustration.
31
D4575-3