Chapter 1: Overview
1.1 Introduction
This handbook provides instructions to assist you in the installation and set up of
the following radar scanners:
2D 18" 2 kW Radome Scanner
4D 24" 4 kW Radome Scanner
5S
48" 4 kW Open Array Scanner
7S
72" 4 kW Open Array Scanner
9S
48" 10 kW Open Array Scanner
11S 72" 10 kW Open Array Scanner
These scanner units may be connected to any HSB/hsb
In addition, the 2D radome scanner may be connected to an SL70, SL70 PLUS or
SL70RC PLUS 7" LCD display unit.
To achieve full compatibility with a C-Series Display, your Raymarine radar
Note:
scanner may require upgrading. Please refer to the C-Series Display
Handbook
, or contact Technical Support for details.
A typical Pathfinder Radar system is illustrated below.
Scanner
Compass
Display Unit
Distribution Panel
NMEA
12/24V Supply
12V Supply
2
or C-Series display unit.
Owner's
GPS
Junction
Box
SeaTalk
12V Supply
D4288-4
1