85017_2.book Page 13 Monday, July 16, 2001 3:05 PM
Upgrade Instructions
Latitude
Response level
Turn rate
Speed threshold
Rudder datum selection
Latitude is used to compensate for Northerly/Southerly headings
errors. The settings available are as follows:
•
Range = 0° to 80° (default = 0°)
This sets the response level when the pilot is switched on. The settings
available are as follows:
•
Level 1: Automatic sea state control
•
Level 2: Automatic sea state inhibit (default)
•
Level 3: Seastate inhibit with counter rudder
•
Level 4: Workboat mode
Turn rate is the rate in degrees per second at which the boat will turn
when course changes are made via the autopilot. The settings
available are as follows:
•
Range = 1° to 20°
•
Default = 20°
Speed threshold sets the speed below which the Workboat response
levels apply. The settings available are as follows:
•
Range = 2 to 15 knots
•
Default = 6 knots
Rudder datum selection allows the pilot to either center the rudder or
maintain the current rudder position when AUTO is selected.
The settings available are as follows:
•
0 = Center rudder
•
1 = Current position (default)
13