What Is A Wind Shift Warning; How Do I Use Autotack In Wind Vane Mode - Raymarine ST6002 Operating Manual

20

What is a Wind Shift warning?

If the autopilot detects a wind shift of more than 15° it will sound the wind shift
warning and display the WIND SHIFT message:
• To cancel the warning, and retain the existing wind angle and new heading,
press standby and auto together.
• Alternatively, to cancel the warning and return to the previous heading:
• adjust the locked wind angle using the -1 , +1 , -10 and +10 buttons.
• press standby to return to hand steering, steer onto the required head-

How do I use AutoTack in Wind Vane mode?

If you use the AutoTack function in Wind Vane mode, make sure the wind vane has
Note:
been centered accurately.
The SmartPilot has a built in automatic tack facility (AutoTack) that turns the boat
through 100° in the required direction:
• to AutoTack to port: press the -1 and -10 buttons together.
• to AutoTack to starboard: press the +1 and +10 buttons together.
AutoTack - Port
If you have set the vessel type to SAIL BOAT , you can adjust the default Auto-
Note:
Tack angle in User Calibration (see page 23).
When you AutoTack in Wind Vane mode, the boat turns through the AutoTack
angle. The SmartPilot will then trim the heading to mirror the locked wind angle
from the previous tack.
ing, and press standby and auto together to return to Wind Vane mode
with the new wind angle.
Wind
AutoTack
angle
ST6002 SmartPilot Controller Operating Guide
AutoTack - Starboard
AutoTack
angle
Wind
D5399-2