AMX NX-1200 Webconsole And Programming Manual page 18
Nx-series controllers, enova dvx all-in-one presentation / digital media switchers, massio controlpads
Hide thumbs
Also See for NX-1200:
- Hardware reference manual (42 pages) ,
- Hardware reference manual (43 pages) ,
- Hardware reference manual (48 pages)
Table of Contents
Advertisement
3.
In the Workspace area, right-click and select Refresh Zero Conf ig List. The controller appears in the list of devices as shown in
FIG. 2:
Workspace bar (Zero-Config tab selected)
FIG. 2
4.
Double-click the Master you want to access it in the WebConsole.
Accessing the Master requires valid login information. The browser will prompt you for User ID and Password before displaying
the configuration pages for the selected device.
Note that the serial number is appended to the name of the device.
After logging in, you can configure the device (changing IP settings, NetLinx settings, User settings, etc) via the pages in the
WebConsole (see the On-Board WebConsole User Interface section on page 34).
NX-Series Controllers - WebConsole & Programming Guide
Overview
18
Hide quick links:
Advertisement
Table of Contents
