Show Device <D:p:s; Show Https Redirect; Show Log - AMX NX-1200 Webconsole And Programming Manual

Terminal Commands (Cont.)
Command
SHOW DEVICE <D:P:S>

SHOW HTTPS REDIRECT

SHOW LOG

NX-Series Controllers - WebConsole & Programming Guide
Description
Displays a list of devices present on the bus, with their device attributes.
Example:
>SHOW DEVICE [0:1:0]
Local devices for system #1 (This System)
----------------------------------------------------------------------------
Device (ID)Model
00000 (00256)NXC-ME260/64M
(PID=0:OID=0) Serial=0,0,0,0,0,0,0,0,0,0,0,0,
Physical Address=NeuronID 000531589201
(00256)vxWorks Image
(PID=0:OID=1) Serial=N/A
(00256)BootROM
(PID=0:OID=2) Serial=N/A
(00256)AXlink I/F uContr(00001)
(PID=0:OID=3) Serial=0000000000000000
Displays the status of the HTTPS redirect flag.
See the SET HTTPS REDIRECT command on page 112.
Displays the log of messages stored in the Master's memory. The Master logs all internal messages
and keeps the most recent messages. The log contains:
• Entries starting with first specified or most recent
• Date, Day, and Time message was logged
• Which object originated the message
• The text of the message:
SHOW LOG [start] [end]
SHOW LOG [filename]
SHOW LOG ALL
- [start] specifies message to begin the display.
- If start is not entered, the most recent message will be first.
- If end is not entered, the last 20 messages will be shown.
- If [ALL] is entered, all stored messages will be shown, starting with the most recent.
Example:
>SHOW LOG
Message Log for System 50 Version: v2.10.75
Entry Date/Time
-------------------------------------------------------
1: 11-01-2001 THU 14:14:49 ConnectionManager
Memory Available = 11436804 <26572>
2: 11-01-2001 THU 14:12:14 ConnectionManager
Memory Available = 11463376 <65544>
3: 11-01-2001 THU 14:10:21 ConnectionManager
Memory Available = 11528920 <11512>
4: 11-01-2001 THU 14:10:21 TelnetSvr
Accepted Telnet connection:socket=14 addr=192.168.16.110
port=2979
5: 11-01-2001 THU 14:05:51 Interpreter
CIpEvent::OnLine 10002:1:50
6: 11-01-2001 THU 14:05:51 Interpreter
CIpEvent::OnLine 128:1:50
7: 11-01-2001 THU 14:05:51 Interpreter
CIpEvent::OffLine 128:1:50
8: 11-01-2001 THU 14:05:51 Interpreter
CIpEvent::OnLine 96:1:50
9: 11-01-2001 THU 14:05:51 Interpreter
CIpEvent::OffLine 96:1:50
10: 11-01-2001 THU 14:05:51 Interpreter
CIpEvent::OnLine 128:1:50
11: 11-01-2001 THU 14:05:51 Interpreter
CIpEvent::OnLine 96:1:50
12: 11-01-2001 THU 14:05:51 Interpreter
CIpEvent::OnLine 5001:16:50
13: 11-01-2001 THU 14:05:51 Interpreter
CIpEvent::OnLine 5001:15:50
14: 11-01-2001 THU 14:05:51 Interpreter
To display only the startup log, use the SHOW START LOG command (see page 118).
Terminal (Program Port/Telnet) Commands
(ID)Mfg FWID Version
(00001)AMX Corp. 00336 v3.00.312
(00001)
(00001)
00270 v1.03.14
Object Text
00337 v3.00.312
00338 v3.00.312
117