Edit User Menu; Edit Device Menu - AMX NX-1200 Webconsole And Programming Manual

Security Options Menu (Cont.)
Command
11) Auth on ICSP-ICSLAN
12) Encryption on ICSP-ICSLAN
13) HTTP Service
14) HTTPS Service
15) Telnet Service
16) SSH Service
17) FTP Service
18) SFTP Service
19) ICSP on WAN
20) ICSP on ICSLAN
21) General Configuration
Security
22) LDAP Security

Edit User Menu

The Edit User Menu is accessed whenever you enter the Add user, or Edit user selections from the Setup Security menu. The Edit
User Menu options are described in the following table:
Edit User Menu
Command
1) Generate New Password
2) Rename User
3) Require Password Change On
Next Login
4) Change Role Membership
5) Display Role Membership
6) Lock/Unlock User

Edit Device Menu

The Edit Device Menu is accessed whenever you enter the Add device, or Edit device selections from the Setup Security menu. The
Edit Device Menu options are described in the following table:
Edit Device Menu
Command
1) Generate Device Password
2) Change Role Membership
3) Display Role Membership
4) Lock/Unlock Device
5) Rename
NX-Series Controllers - WebConsole & Programming Guide
Description
This selection enables/disables whether the Master requires user name and password
authentication on devices connected to the ICSLAN ports on the Master.
This selection enables/disables whether there is encryption on the ICSLAN ports on the Master.
This selection enables/disables HTTP access to the Master.
This selection enables/disables HTTPS access to the Master.
This selection enables/disables Telnet access to the Master.
This selection enables/disables SSH access to the Master.
This selection enables/disables FTP access to the Master.
This selection enables/disables SFTP access to the Master.
This selection enables/disables ICSP on WAN ports.
This selection enables/disables ICSP on ICSLAN ports.
This selection enables/disables general configuration including access to WebControl for RMS and
RPM Configuration and the following parameters:
• Auto-locate enable/disable
• Device Holdoff setting
• Duet memory allocation
• ICSP TCP timeout
• Master-to-master route mode
• Message log length
• Message thresholds for threads
• Queue sizes for threads
• UDP broadcast rate
This selection enables/disables LDAP Security. Refer to Appendix A: LDAP Implementation Details
on page 127 for details on LDAP Implementation.
Description
This selection creates a new password for the user. Once the new password is entered, the user
must use the new password from that point forward, or change the password.
This selection enables you to change the user's name.
This selection enables you to toggle whether the user will be required to change its password
the next time the user logs in to the Master. When this option is enabled, the words "already
set" appear next to the option in the Edit menu.
This selection enables you to assign or remove a role from the user. Active roles for the user are
marked with an asterisk (*).
This selection will display any roles assigned to the user.
This selection enables you to lock the user's account. When locked, the option changes to
Unlock User. Select the option again to unlock the user's account.
Description
This selection prompts you to enter the new password (twice) for the user. Once you enter the
new password, you must use the new password from that point forward.
This selection enables you to assign or remove a role from the device. Active roles for the device
are marked with an asterisk (*).
This selection will display any roles assigned to the device.
This selection enables you to lock the device's account. When locked, the option changes to
Unlock Device. Select the option again to unlock the device's account.
This selection enables you to change the device's name.
Terminal (Program Port/Telnet) Commands
125