Rocker Arm Shaft Assembly - Ford Aerostar 1997 Workshop Manual

1997 Aerostar/Ranger
Section 03-01C: Engine, 4.0L V-6
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES

Rocker Arm Shaft Assembly

Disassembly
1. Remove the spring washer and pin from each end of the rocker arm shaft (6563).
2. Slide the rocker arms (6564), springs and rocker arm shaft supports (6531) off the rocker arm shaft.
Be sure to mark the parts for assembly in the same locations.
3. If it is necessary to remove the plugs from each end of the rocker arm shaft, drill or pierce the plug on
one end large enough for steel rod to pass through. Use a steel rod to knock out the plug on the
opposite end. Working from the open end, knock out the remnants of the first plug.
Item Part Number
1 6564
2 6531
3 6587
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31C50.HTM~gen~ref.HTM
Description
Rocker Arm
Rocker Arm Shaft Support
Rocker Arm Shaft Spring
tomsn048@gmail.com
1997 Aerostar, Ranger Workshop Manual
Page 1 of 2
2011-04-27