Assembly Setup; Isofix Child Restraint Systems - Ford 2008 Ka Owner's Handbook Manual

069-084 Ford KA EN_065-080 Ford KA IT 14/04/14 15:41 Pagina 76

ASSEMBLY SETUP

FOR ISOFIX CHILD
RESTRAINT SYSTEM
Provision has been made on the car to
mount a Universal Isofix child restraint
system, a new European standardised
system for carrying children safely.
Isofix systems can be fitted alongside a
traditional child restraint system. An
example of child restraint system is
shown in fig. 9. The Universal Isofix
restraint system covers weight group 1.
Specific Isofix child restraint systems
cover the other weight groups. These
systems must be designed, tested and
approved specifically for this car (refer
to the list of cars attached to the
restraint system).
Due to its different anchoring system,
the child's seat shall be anchored to the
proper lower metal rings A-fig. 10, set
between rear seat back and cushion.
After removing the rear shelf, secure
the upper belt (provided with the child's
seat) to ring B-fig. 11 set between the
rear backrest and the boot floor. Do
not use the ring B to secure other
objects.
76
fig. 9
Remember that when using a Universal
Isofix child restraint system, you can
use all approved systems with the
marking ECE R44 (R44/03 or superior)
"Universal Isofix".
The Universal Isofix "Duo Plus" child
restraint system is available from
Lineaccessori Ford.
A
fig. 10
B
KA00052m
fig. 11
For any further installation/usage details,
refer to the "Instruction Manual"
provided with the child restraint
system.
KA00053m
B
KA00054m