Cylinder Block Assembly - Ford Aerostar 1997 Workshop Manual

1997 Aerostar/Ranger
Section 03-01C: Engine, 4.0L V-6
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES

Cylinder Block Assembly

Disassembly
1. Mount the engine (6007) on a work stand and remove all parts not furnished with the new cylinder
assembly.
2. Remove the old cylinder assembly from the work stand.
Assembly
1. Clean the gasket and seal surfaces of all serviceable parts and assemblies.
2. Position the new cylinder assembly in a work stand and transfer all serviceable parts removed from
the old cylinder assembly.
3. Check all assembly clearances and correct as necessary.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31C48.HTM~gen~ref.HTM
1997 Aerostar, Ranger Workshop Manual
tomsn048@gmail.com
Page 1 of 1
2011-04-27