Rear Axle And Rear Suspension Assembly - Ford Corsar Repair Manual

REAR AXLE AND REAR SUSPENSION ASSEMBLY
Removal and Installation
CAUTION:
Do not jack up at the parallel links or radius rods.
Disconnect brake hydraulic line and parking brake cable at
equalizer.
Remove suspension assembly (one side).
1) Remove parallel link fixing bolt, radius rod fixing bolt,
stabilizer fixing bolt, stabilizer connecting rod brackets and
parking brake cable fixing bolts.
2) Remove rear seat and parcel shelf. Refer to section BF.
3) Remove strut securing nuts (Upper side).
Then pull out strut assembly.