Solution System; Functional Description - Clarke CA30 20B Service Manual

Service Manual – Clarke CA30 20B and 17E 51

Solution System

Functional Description

The solution tank is molded into the main body of the
machine, and is located below the recovery tank. It is
comprised of the hollow interior of the main body of the
machine.
The solution exits the solution tank at the lower-right
Solution
corner through a flow-control and shutoff valve. The
Fill
solution then passes through a filter, before reaching
the solution solenoid. The solution valve can be
adjusted to control the amount of solution flow. The
solution solenoid is strictly on/off.
Solution
Tank
The exit of the solution solenoid is positioned above
the scrub brush/pad to put solution into the scrubbing
area. The solution solenoid can be active only when the
Solution
scrub motor is active.
Solenoid
Solution
Valve
Solution
Filter