SOLUTION/CLEAN WATER SUPPLY SYSTEM
SOLUTION/CLEAN WATER TANK AND SUPPLY SYSTEM CLEANING
1.
Drive.the.machine.to.the.appointed.solution.disposal.area.
2.
Turn.the.ignition.key.(80).to."0"..
Empty.the.solution/clean.water.tank.(20).with.the.hose.(17).
3.
Start.the.machine.(as.shown.in.the.User.Manual).and.keep.it.running.until.the.solution/clean.water.tank.is.completely.empty.
4.
Turn.the.ignition.key.(80).to."0"..
Clean.the.tank.(20).with.clean.water.
5.
Start.the.machine.(as.shown.in.the.User.Manual).and.keep.it.running.until.the.solution/clean.water.tank.is.completely.empty.
6.
Clean the solution filter (see the following procedure).
SOLUTION FILTER CLEANING
1.
Drive the machine on a level floor.
2.
Turn.the.ignition.key.(80).to."0"..
Close.the.solution.tap.(A,.Fig..8).under.the.machine.left.lower.side..The.tap.(A).is.closed.when.it.is.in.the.position.(B).and.it.is.open.
when.it.is.in.the.position.(C).
3.
Remove the transparent cover (D), then remove the filter strainer (E). Clean and install them on the support (F).
NOTE
The filter strainer (E) must be correctly positioned on the housing (G) of the support (F).
5.
Open.the.tap.(A).
SERVICE MANUAL -
SOLUTION/CLEAN WATER SUPPLY SYSTEM
F
E
D
FOCUS
II L17 - S20 - L20 - L20 Cyl. - BOOST
®
C
A
B
G
E
L20
®
ENGLISH
P100118
1