Dialing Numbers From A Caller Id Record; Deleting Caller Id Records - Radio Shack HandsfreePhone withCallerID/CallWaiting Owner's Manual

DIALING NUMBERS
FROM A CALLER ID
RECORD
To dial a number stored in a Call-
er ID record, recall the record,
then press
CALL BACK/FLASH
PRESS TALK appears. If the
area code of the received call is
the same as the one you stored in
the phone, the record does not
show the area code. If it is differ-
ent, the record shows the area
code.
To dial the number as it appears
on the display, simply press
If you need to add the area code
and/or use 1+ dialing, repeatedly
press
CALL BACK/FLASH
required number appears.
For example, if you stored area
code 817 into the phone and you
received a call from 817-555-
1234, you see the following as
you repeatedly press
.
FLASH
• 5551234
• 18175551234
• 8175551234
• 15551234
To stop dialing after the phone
started to dial, press
Note: If a Caller ID record does
not contain a phone number (if it
was blocked by the caller, for ex-
ample) you cannot dial from that
.
record.
DELETING CALLER ID
RECORDS
You can delete Caller ID records
individually or all at once.
To delete a single Caller ID
record, repeatedly press
.
TALK
to recall the record you want to
delete,
ERASE?
until the to confirm the deletion. Press
ERASE
ERASED
the record was deleted.
To delete all Caller ID records,
hold down
onds.
CALL BACK/
prompting you to confirm the de-
letion. Press
records, or press
cancel the deletion.
When you delete all Caller ID
records,
CALLS
Caller ID Operation
again.
TALK
or
then press
ERASE
appears, prompting you
again. MESSAGE
appears, indicating that
for about 4 sec-
ERASE
appears,
ALL ERASE?
to delete the
ERASE
, or
TALK
ERASED then
appears.
.
to
NO
13