Table of Contents
Advertisement
43-461.fm Page 22 Friday, August 13, 1999 8:52 AM
To clear a number stored in an upper
memory position, press
the desired memory location button.
To clear a number stored in a lower
memory
position, press
then the desired memory loca-
LOWER
tion button.
The telephone rings once to indicate the
number is cleared.
Entering a Pause
In some telephone systems, you must
dial an access code (
9
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number; however, you must also store a
pause after the access code to allow the
outside line time to connect. To enter a
2-second pause, press
For a longer pause, press
additional times.
AL
Note: You must enter at least one digit
before you can store a pause.
Dialing Stored Numbers
To dial a number stored in memory, lift
the handset or press
use a line other than 1, press the line
button. Then:
• To dial a number stored in an upper
memory position, press the desired
memory location button.
22
then
PROGRAM
,
PROGRAM
, for example) and
.
PAUSE/REDIAL
PAUSE/REDI-
. To
SPKR PHONE
• To dial a number stored in a lower
memory position, press
then the desired memory location
button.
Chain-Dialing Service Numbers
For quick recall of numbers for special
services (such as alternate long distance
or bank by phone), store each group of
numbers in its own memory location.
To use the stored special service infor-
mation, dial the service's main number
first. Then, at the appropriate place in the
call, press
(if necessary) then
LOWER
the button for the location where the ad-
ditional information is stored.
Testing Stored Emergency
Numbers
If you store an emergency service's
number (police department, fire depart-
ment, ambulance) and you choose to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand pe-
riods. Also, remain on the line to explain
the reason for your call.
LOWER
Hide quick links:
Advertisement
Table of Contents
