Vrf (Radius) - Cisco CRS User Manual

Authentication, Authorization, and Accounting Commands

vrf (RADIUS)

To configure the Virtual Private Network (VPN) routing and forwarding (VRF) reference of an AAA RADIUS
server group, use the vrf command in RADIUS server-group configuration mode. To enable server groups
to use the global (default) routing table, use the no form of this command.
vrf vrf-name
no vrf vrf-name
Syntax Description
vrf-name
Command Default
The default VRF is used.
Command Modes
RADIUS server-group configuration
Command History
Release
Release 3.4.0
Usage Guidelines
Use the vrf command to specify a VRF for an AAA RADIUS server group and enable dial-up users to use
AAA servers in different routing domains.
Task ID
Task ID
aaa
Examples
The following example shows how to use the vrf command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# aaa group server radius group1
RP/0/RP0/CPU0:router(config-sg-radius)# vrf vrf1
Related Commands
Command
aaa group server tacacs+, on page 22
OL-24740-01
Name assigned to a VRF.
Modification
This command was introduced.
Operations
read, write
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
Description
Groups different RADIUS server hosts into distinct
lists and distinct methods.
vrf (RADIUS)
125