Show Radius - Cisco CRS User Manual

show radius

show radius
To display information about the RADIUS servers that are configured in the system, use the show radius
command.
show radius
Syntax Description
This command has no keywords or arguments.
Command Default
If no radius servers are configured, no output is displayed.
Command Modes
EXEC
Command History
Release
Release 3.3.0
Usage Guidelines
Use the show radius command to display statistics for each configured RADIUS server.
Task ID
Task ID
aaa
Examples The following sample output is for the show radius command:
RP/0/RP0/CPU0:router# show radius
Global dead time: 0 minute(s)
Server: 1.1.1.1/1645/1646
Timeout: 5 sec, Retransmit limit: 3
Quarantined: No
Authentication:
Accounting:
Server: 2.2.2.2/1645/1646
Timeout: 10 sec, Retransmit limit: 3
Authentication:
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
76
is UP
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
0 requests, 0 pending, 0 retransmits
0 responses, 0 timeouts, 0 bad responses
0 bad authenticators, 0 unknown types, 0 dropped
0 ms latest rtt
is UP
Authentication, Authorization, and Accounting Commands
Modification
This command was introduced.
Operations
read
OL-24740-01